Roland XV-88 用户手册

• The output destination of the signal after passing 

through the chorus is set with Output Assign parameter 
or Select parameter (PATCH/EFFECTS/PATCH CHO 
OUT)/(RHYTHM/EFFECTS/RHYTHM CHO OUT) (p. 
158).

• The output destination of the signal after passing 

through the Reverb is set with the Output Assign 
parameter (PATCH/EFFECTS/PATCH REV OUT)/
(RHYTHM/EFFECTS/RHYTHM REV OUT) (p. 160).

For more on how to set each effect, refer to the pages 
shown below.

• Multi-effects 

→

• Chorus 

→

• Reverb 

→

5. Press [EXIT] to return to the PATCH PLAY/RHYTHM 

PLAY page.

An asterisk 

 will be displayed at the left of the Patch/

Rhythm Set group. This indicates that the Patch/Rhythm 
Set settings have been modified.

If you select another Patch/Rhythm Set in the group 
with an asterisk 

, the modified Patch/Rhythm Set 

settings will be lost. To keep these modified settings, 
perform the save operation (p. 164).

You can set the direct sound’s output method and the 
amount of effect applied for each Tone or Rhythm Tone 
individually.

1. After confirming you are in Patch/Rhythm Set mode, 

2. Press [EDIT] to make the indicator light up, press the 

[EFFECTS] function button, and press

or

to 

display the OUTPUT page.

fig.07-04

3. Choose the Tone/Rhythm Tone for which you want to 

make settings.

After turning off the [EDIT] indicator, use TONE SELECT 
[1]–[4] to select the tone.

Press the key that accesses the Rhythm Tone you wish to set. 
After turning off the [EDIT] indicator, you can also use 
TONE SELECT [1]–[4] to select the following setting.

TONE SELECT [1]: move to an octave lower key

TONE SELECT [2]: move to the semitone below

TONE SELECT [3]: move to the semitone above

TONE SELECT [4]: move to an octave higher key

4. Press

or

to move the cursor to the parameter 

you’re going to modify.

Output Assign (Output Assign/Output Level★)

Sets the direct sound’s output method and volume for each 
Tone or Rhythm Tone.

: Output in stereo through Multi-effects. You can also 

apply Chorus or Reverb to the sound that passes through 
Multi-effects.

: Output to the OUTPUT A (MIX) jacks in stereo 

without passing through Multi-effects.

: Output to the OUTPUT B jacks in stereo without 

passing through Multi-effects.

: Output to the INDIVIDUAL 1 jack in mono without 

passing through Multi-effects.

: Output to the INDIVIDUAL 2 jack in mono without 

passing through Multi-effects.