Roland XP-30 用户手册

■

fig.0-02a

fig.0-02b

These connectors can be connected to other MIDI devices to 
receive and transmit MIDI messages. 

fig.0-02c

Set this switch depending on the type of computer connected 
to Computer connector, or the software you are using. Turn 
the power off before changing the setting of this switch.  If 
you wish to use the MIDI connectors, set this switch to MIDI. 

A special Computer cable (sold separately) can be connected 
here. The type of cable required will depend on your computer.
When the Computer switch located at the left is set to MIDI, 
this connector cannot be used. 

fig.0-02d

You can connect optional expression pedals to these jacks. By 
assigning a desired function to a pedal, you can use it to 
select or modify sound or perform various other control. You 
can also connect optional pedal switches to sustain sound. 

An optional pedal switch can be connected to this jack for 
use as a hold pedal. 

fig.0-02e

These jacks output the audio signal to the connected mixer/
amplifier system in stereo. For mono output, use the L jack. 

fig.0-02f