Roland HP-201 用户手册
39
Connecting External Devices
■
Switching Local Control On and
Off
Off
When connecting a MIDI sequencer, set Local Control to
“OFF.”
As illustrated, information describing what has been played on
the keyboard is passed to the internal sound generator over
two different routes, (1) and (2). As a result, you hear
overlapping or intermittent sounds. To prevent this from
happening, route (1) must be severed, by setting the unit to
what is known as “Local Off.”
“OFF.”
As illustrated, information describing what has been played on
the keyboard is passed to the internal sound generator over
two different routes, (1) and (2). As a result, you hear
overlapping or intermittent sounds. To prevent this from
happening, route (1) must be severed, by setting the unit to
what is known as “Local Off.”
fig.localcont.e
Local Control ON
The keyboard and the internal sound generator are in a linked
state.
state.
fig.localon.e
Local Control OFF
The keyboard and the internal sound generator are in an
unlinked state. No sound will be produced by the keyboard
when it is played.
unlinked state. No sound will be produced by the keyboard
when it is played.
fig.localoff.e
When a Roland MT series instrument is connected, it is not
necessary to make the Local Off setting. MT units transmit
Local Off messages when their power is switched on. If
you turn on the power in the order of the HP201
necessary to make the Local Off setting. MT units transmit
Local Off messages when their power is switched on. If
you turn on the power in the order of the HP201
→
MT
series, Local Off will be set automatically.
Local On is set when the power is switched on.
1.
While holding down the [METRONOME] and
[REVERB/KEY TOUCH] buttons, the “C8” note to turn
the setting On, or press the “B7” note to turn the
setting Off.
[REVERB/KEY TOUCH] buttons, the “C8” note to turn
the setting On, or press the “B7” note to turn the
setting Off.
■
Sending Recorded Performance
Data to a MIDI Device
(Composer Out)
Data to a MIDI Device
(Composer Out)
When Composer Out is active, you can send performance
data recorded with the HP201 to a connected MIDI device or
computer.
data recorded with the HP201 to a connected MIDI device or
computer.
When you turn on the power, this is set to “Off.”
1.
While holding down the [METRONOME] button and
[REVERB/KEY TOUCH] button, press the F7 or F 7
key to switch Composer Out on/off.
[REVERB/KEY TOUCH] button, press the F7 or F 7
key to switch Composer Out on/off.
If Composer Out is turned on, the song data will be sent
to a connected MIDI device or computer when you play
back a recorded song.
to a connected MIDI device or computer when you play
back a recorded song.
(1)
MIDI
MIDI
MIDI
MIDI
(2)
IN
IN
OUT
OUT
Sequencer
Memory
Sound
Generator
Each note played
is sounded twice
Thru function On
Local On
Local On
Sound is emitted
Sound Generator
Local Off
No sound produced
Sound Generator
Key Pressed
Value
B7
Off
C8
On
Key Pressed
Value
F7
Off
F
7
On
B7 C8
C8
F7
HP201_e.book 39 ページ ２００７年２月２８日 水曜日 午前９時１０分