Roland SH-201 用户手册

下载
页码 84
 
55
 
Using the SH-201 together with your computer or another sound module
 
Using the SH-201 together with your 
computer or another sound module
 
Note when using USB MIDI
 
The number of notes that can be played simultaneously (i.e., the polyphony) may decrease when you’re using 
USB MIDI or when connected via MIDI (p. 58). This occurs when the MIDI messages produced when you play 
the SH-201’s keyboard are routed through your computer or external MIDI device and then back to the SH-201, 
causing the SH-201’s sound generator to play a “duplicate” note.
To prevent this problem, you can either turn off the MIDI Thru function of the connected device, or set the 
KEYBOARD parameter (p. 69) LOCAL SWITCH setting “OFF.”
USB audio signal flow is shown in the illustration below.
 
USB audio signal flow
fig.USB-Driver.e
What is the USB driver?
The USB Driver is a software which passes data 
between the SH-201 and the application (sequencer 
software, etc.) that is running on the USB-connected 
computer.
The USB Driver sends data from the application to 
the SH-201, and passes data from the SH-201 to the 
application.
Application
USB
Driver
Computer
USB connector
USB cable
USB connector
SH-201
SH-201
Keyboard
SH-201
Sound Generator
Disconnected
(LOCAL SWITCH: OFF)
(External)
Sequencer
SH-201
Keyboard
SH-201
Sound Generator
(LOCAL SWITCH: ON)
(External)
Sequencer
Sounded in duplicate
Sounded once
INPUT jacks
OUTPUT jacks
USB connector
USB Audio
IN
USB Audio
OUT
AUDIO FILTER
(Stereo)
(Stereo)
INPUT jacks
OUTPUT jacks
USB connector
USB Audio
IN
USB Audio
OUT
OSC
EXT IN (Mono)
SH-201_r_e.book 55 ページ 2006年4月27日 木曜日 午前11時28分