Roland FC-300 用户手册
31
Patch Mode
You can connect separately available footswitches and expression pedals and use the
external pedals just like the FC-300’s pedals to transmit Control Change messages,
Realtime messages, and other such data.
external pedals just like the FC-300’s pedals to transmit Control Change messages,
Realtime messages, and other such data.
When a BOSS FS-5U, FS-6 Footswitch is Connected,
Assigned to CTL Pedal:
Assigned to CTL Pedal:
These function in the same way as the FC-300’s built-in control pedals.
Connect a control pedal to the EXP PEDAL/CTL jack and set the FC-300 to enable
use of the pedal. (p. 50)
use of the pedal. (p. 50)
* If you have two FS-5U pedals or an FS-6 pedal connected to the CTL3,4 jack with a special
PCS-31 connecting cable (from Roland; available separately), the footswitch connected to
the plug with the white ring controls the setting of CONTROL 3, and the footswitch
connected to the plug with the red ring controls the setting of CONTROL 4.
the plug with the white ring controls the setting of CONTROL 3, and the footswitch
connected to the plug with the red ring controls the setting of CONTROL 4.
* When only one footswitch is connected to the CTL3,4 jack, the CONTROL 3 settings are
enabled.
* When an FS-6 is connected to the CTL3,4 jack with an optional connection cable
(stereo 1/4” phone
←→
stereo 1/4” phone), pedal switch B operates according to the
CONTROL 3 settings, and pedal switch A operates according to the CONTROL 4
settings.
settings.
When a Roland EV-5, BOSS FV-500L or FV-500H is
Connected, Assigned to Expression Pedal:
Connected, Assigned to Expression Pedal:
These function in the same way as the FC-300’s built-in expression pedals.
Connect a expression pedal to the EXP PEDAL/CTL jack and set the FC-300 to
enable use of the pedal. (p. 50)
enable use of the pedal. (p. 50)
* These do not operate as expression pedal switches.
* If you are connecting a BOSS FV-500L or FV-500H, connect the pedal with an optional
connection cable (stereo 1/4” phone
←→
stereo 1/4” phone).
Each pedal is set at the factory as shown below.
Using the External Control Pedals and Expression Pedals
The Controller Number of Each Pedal
Pedal
CC#
Range
Mode
CTL3
76
0–127
LATCH
CTL4
75
0–127
LATCH
CTL5
10
0–127
LATCH
CTL6
91
0–127
LATCH
CTL7
11
0–127
LATCH
CTL8
64
0–127
LATCH
EXP PEDAL 3
76
0–127
–
EXP PEDAL 4
10
0–127
–
EXP PEDAL 5
11
0–127
–
instructions on setting the
polarity switch and mode
switch for the connected pedal.
polarity switch and mode
switch for the connected pedal.
FC-300_e1.book 31 ページ ２００７年４月２４日 火曜日 午前１０時１０分