Roland 04672434 用户手册

下载
页码 184
 
41
Chapter 3 Global Device Settings (SYSTEM)
 
Chapter 3
 
Both MAIN OUT and SUB OUT feature four-band EQs. 
 
EQ (MAIN) is applied to the output from MAIN OUT; 
EQ (SUB) is applied to the output from SUB OUT.
 
1.
 
 
2.
 
Press PAGE [
] [
] to display Page 2–5.
 
3.
 
Use [F1] – [F6] or the F1 – F6 knobs to adjust 
the tone.
 
This controls the overall threshold value for the noise suppressor 
settings in the individual patches. This is an effective tool when 
basses are changed during performances and for making 
adjustments in response to noise levels at the performance venue. 
This is an overall setting and does not alter the individual patch 
settings.
 
1.
 
 
2.
 
Press PAGE [
] to display Page 6.
 
3.
 
Adjust the level with the F1 knob.
 
This adjusts the noise suppressor threshold levels set in each 
patch.
-20 dB – +20 dB
 
*
This adjustment has no effect on patches in which the noise 
suppressor is off.
*
To use the levels set in the individual patches, set this to 0 dB.
 
Adjusting the Overall Tone 
(GLOBAL EQ)
 
Parameter/
Range
Explanation
 
MAIN EQ (Main Equalizer), 
SUB EQ (Sub Equalizer)
 
A four-band equalizer with high and low ranges is provided.
 
MAIN EQ SW (Main Equalizer Switch), 
SUB EQ SW (Sub Equalizer Switch)
 
OFF, ON
Turns the EQ effect on/off.
 
TOTAL GAIN
 
-12–+12dB
Adjusts the volume before the equalizer.
 
LOW GAIN
 
-12–+12dB
Adjusts the low frequency range tone.
 
HIGH GAIN
 
-12–+12dB
Adjusts the high frequency range tone.
 
LOW MID FREQ (Low Middle Frequency)
 
20Hz–10.0kHz
Specifies the center of the frequency range that will 
be adjusted by the LOW MID GAIN.
 
LOW MID Q (Low Middle Q)
 
0.5–16
Adjusts the width of the area affected by the EQ 
centered at the LOW MID FREQ. 
Higher values will narrow the area.
 
LOW MID GAIN (Low Middle Gain)
 
-12–+12dB
Adjusts the low-middle frequency range tone.
 
HIGH MID FREQ (High Middle Frequency)
 
20Hz–10.0kHz
Specifies the center of the frequency range that will be 
adjusted by the HIGH MID GAIN.
 
HIGH MID Q (High Middle Q)
 
0.5–16
Adjusts the width of the area affected by the EQ 
centered at the HIGH MID FREQ. 
Higher values will narrow the area.
 
HIGH MID GAIN (High Middle Gain)
 
-12–+12dB
Adjusts the high-middle frequency range tone.
 
Controlling the Overall Effect of 
the Noise Suppressor (Total NS)
VB-99_e.book 41 ページ 2008年8月18日 月曜日 午後1時10分