Roland 04672434 用户手册

下载
页码 184
 
48
Chapter 4 Using the VB-99 in Combination with an FC-300
 
This switches the FC-300’s AMP CTL 1 and AMP CTL 2 parameters 
on and off.
When the bass amp’s channel switch jack is connected to the FC-
300’s AMP CONTROL 1 jack (or AMP CONTROL 2 jack), you can 
then switch the bass amp channels with the VB-99’s AMP CTL1 (or 
AMP CTL2) parameter.
 
1.
 
Use the PATCH/VALUE dial to select the patch 
you want to set.
 
2.
 
Press [NAME/KEY/BPM].
 
3.
 
Press [F4] (AMP CTL).
 
4.
 
Use [F1] and [F2] or the F1 and F2 knobs to set 
AMP CTL1 and AMP CTL2 to ON or OFF.
 
With Amp Control, not only can you switch amp 
channels, you can also use it to switch the amp’s effects 
on and off, like a foot switch controller.
 
Setting the FC-300 Amp 
Control
 
Available Settings Description
 
OFF
The FC-300’s AMP CTL1 and AMP CTL2 
parameters are set to OFF.
ON
The FC-300’s AMP CTL1 and AMP CTL2 
parameters are set to ON.
VB-99_e.book 48 ページ 2008年8月18日 月曜日 午後1時10分