Roland SP-555 用户手册

 

This plays the recorded phrase.

 

This saves a phrase recorded using LOOP CAPTURE to a 
pad.

 

By pressing this button you can cancel an operation such 
as sampling or sample deletion. This button will also stop 
pattern playback or recording.
By rapidly pressing this button four times, you can stop all 
currently playing sounds.

 

When you press this button, the display will indicate the 
remaining time available for sampling. By holding down 
this button and pressing a pad, you can select the pad to 
which the effect will apply, or the pad whose settings you 
want to edit (i.e., the current pad).

 

Use this to delete a sample or pattern.

 

Use this to start/stop sampling, or to record a pattern (

 

➜

 

 

 

Use this to resample the sound of a sample processed by 
an effect.

 

Use this to change the playback start/end point of a 
sample, or to change its volume.

 

Use this to specify the playback time or BPM (tempo) of a 
sample.

 

Use this when you want only a portion of the sampled 
sound to be heard. While this button is lit, only the 
specified portion will be heard.

 

➜

 

This switches the grade (standard/lo-fi) at which sampling 
is performed. Lo-fi sampling will occur if this button is lit, 
and standard sampling will occur if this button is 
extinguished.

 

➜

 

This specifies whether you will be sampling in monaural or 
in stereo. Stereo sampling will occur if this button is lit, and 
monaural sampling will occur if this button is extinguished.

 

➜

 

This switches you between “gate playback,” in which the 
sample will sound only while you continue holding down 
the pad, and “trigger playback,” in which the sound will 

alternately start or stop playing each time you press the 
pad. Gate playback will occur if this button is lit, and 
trigger playback will occur if this button is extinguished.

 

➜

 

This switches you between “loop playback” in which the 
sample will play repeatedly when you press the pad, and 
“one-shot playback” in which the sound will play only 
once. Loop playback will occur if this button is lit, and one-
shot playback will occur if this button is extinguished.

 

➜

 

This selects “reverse playback” in which the sample will 
play backward. Reverse playback will occur if this button 
is lit, and normal playback will occur if it is extinguished.

 

When [PATTERN SELECT] is extinguished or when you are 
recording a pattern, these buttons select the sample bank. 
When [PATTERN SELECT] is lit, these buttons select the 
pattern bank. Internal memory bank A or B will be 
selected if you press BANK [A] or [B] so one of the buttons 
is lit. CompactFlash banks C–F will be selected if you press 
BANK [C/G]–[F/J] and light one of the buttons, and 
CompactFlash banks G–J will be selected if you press 
BANK [C/G]–[F/J] and get a button to start blinking.

 

V-LINK (

) is a function that lets you 

perform music and video in synchronization. 
 By using MIDI to connect two or more V-LINK compatible 
devices, you can easily enjoy a wide range of visual 
effects that are linked to the expressive elements of a 
musical performance.

 

 

 

This lets you store effect settings (effect type, CTRL 1/2/3 
knob values) and call them up instantly by operating a 
pad.

 

➜

 

 “Storing effect settings (EFFECT MEMORY)”

 

➜

 

If this is off, samples will play at a fixed volume regardless 
of how strongly you strike the pads.

 

➜

 

Use this when you want to play sounds as a “drum roll.”

 

➜

 

If you press a pad while holding down the HOLD pad, the 
sample will continue sounding even after you release your 
finger.

 

➜

 

You can use the SUB PAD to play the sample of the pad 
you pressed most recently.

SP-555_e.book 12 ページ ２００７年６月２５日　月曜日　午前９時９分