Roland CUBE-80X 用户手册

Appendices

For information on how to set the delay time, refer to “DELAY/LOOPER Knob (p. 17).”

This sound produces heavy low-end reverberations when lower strings 

are played while muted, and airy sustain when chords are played.

Playing with a humbucking rear pickup produces even more extreme 

distortion. What’s more, you can make the sound even heavier by using 

drop tuning or other such settings.

When you want to make the distortion edgier, boost the PRESENCE 

setting. Also, when you’re using this as the lead sound, raising the 

midrange and applying a long delay produces a fat sound with sustain.

This is a transparent sound that uses spatial effects.

Use the JC CLEAN amp, which is modeled on the Roland JC-120, and 

add chorus, long delay, and reverb.

Using this setting with a guitar that has single-coil pickups makes for 

arpeggios and chord strumming with beautiful resonance. If you’re 

using a guitar with humbucker pickups, turn the BRIGHT switch to ON 

to achieve a bright, open sound.

Setting the delay time to a value that makes the delay sound heard 

slightly ahead of the tempo of the phrase played produces a thicker 

sound.

This sound is perfect for the surf music popular in the 1960s.

Using this setting with a guitar that has single-coil pickups makes for an 

edgy sound.

Applying deep spring reverb and using muting picking and chromatic 

runs (muted picking with glissandos) produces the classic surf sound.

SELECT switch = LEAD

Delay time = approx. 600 ms (reference)

SELECT switch = JC CLEAN

BRIGHT switch = OFF

Delay time = approx. 250 ms (reference)

SELECT switch = LEAD

cube-80x.book  20 ページ  ２００８年１２月１２日　金曜日　午後６時７分