Extron electronic VLM 1000 用户手册

Stage 1 — Install the VLR 102 Receiver

c

  Cut a hole in the ceiling tile.  (page 2-4)

c

  Mount the receiver housing to the ceiling tile.  (page 2-4)

c

  Attach a conduit to the back plate if needed.  (page 2-5)

c

  Install the junction box.  (page 2-6)

c

  Attach the receiver housing to the junction box.  (page 2-6)

c

  Attach a conduit to the junction box if needed.  (page 2-6)

c

  Install a raceway if needed.  (page 2-7)

c

  Mark the mounting screw locations on the surface.  (page 2-7)

c

  If using a raceway, remove the appropriate knockout in the receiver  

housing.  (page 2-7)

c

Mount the receiver housing to the surface.  (page 2-8)

c

  Pull the cables to the receiver.  (page 2-10)

c

  Connect the cables to the receiver.  (page 2-10)

c

  Attach the receiver dome to the housing.  (page 2-11)

c

  Pull cables to the PoleVault switcher.  (page 2-13)

c

  Configure the system.  (page 2-14)

c

  Set up the microphone.  (page 2-14)

c

  Test the system.  (page 2-14)

c

  Complete the installation.  (page 2-15)