Pentair IntelliFlo 用户手册

IntelliFlo Installation and User’s Guide

Controls and LEDs

(Continued)

Arrow buttons:

• Up arrow: Move one level up in the menu tree or increase a digit when editing a setting.
• Down arrow: Move one level down in the menu tree or decrease a digit when editing a setting.
• Left arrow: Move cursor left one digit when editing a setting.
• Right arrow: Move cursor right one digit when editing a setting.

Feature 1 button: Starts Feature 1 mode. The LED is lit when mode is active.

Feature 2 button: Starts Feature 2 mode. The LED is lit when mode is active.

Start/Stop button: Start or Stop the pump. When the LED is lit it indicates that the pump is currently running or
in a mode to start automatically.

Reset button: Reset alarm or alert.

LEDs

On: This green LED is on when IntelliFlo is powered on.

Warning: This LED is on if a warning condition is present.

Alarm: This LED is on if an alarm condition has occurred.

Control Panel LCD Display

LCD Display Lines:

• Line 1 - Mode and time. To set A.M. and P.M. time, refer to “Time and Contrast Menu” on page 22.

• Line 2 - Data

• Line 3 - Name of data in line 2

• Line 4 - Run status