Pentair IntelliFlo 用户手册

IntelliFlo Installation and User’s Guide

Navigating the Menu Structure

Before navigating the control panel menu structure, first familiarize yourself with the menu buttons. To
change a parameter setting, use the Left and Right arrow buttons to select the digit, then the Up and Down
arrow buttons to edit the digit. The following example shows how to set the GPM and priming time in the
“Priming” menu (see page 14).

To set the “Priming” mode settings:

1. Ensure that the green power LED is on and the pump is stopped.

If the pump is running, press the Start/Stop button.

2. Press the Menu button. “Pool Data” is displayed.

3. Press the Down arrow to select “Priming”.

4. Press the Select button to access “Max Priming Flow” setting.

Set the GPM:

Press the Select button to set the gallons per minute

(GPM) value.

6. To change the GPM value, press the Left and Right arrows to select

which digit to modify.

Press the Up and Down arrows to change the selected digit. For setting
values, see “Priming menu options” below.

7. When you are done, press the Enter button to save the changes. To

cancel any changes.

Press the Escape button to exit edit mode without saving.

Set the priming time:

Use the Up and Down arrows to select “Max

Priming Time” and “System Priming Time.”

Press the Select to edit the setting.

9. Repeat steps 5, 6, and 7 to edit the setting.

12:15

Pool Data

12:15

Priming

12:15

Priming

Max Priming Flow

12:15

55. GPM

Priming

Max Priming Flow

12:15

005

. GPM

Priming

Max Priming Flow

5. GPM

Priming

Max Priming Flow

5. GPM

Priming

Max Priming Flow

006

. GPM

Priming

Max Priming Flow

006

. GPM

12:15

Priming

Max Priming Flow

60. GPM

12:15

Priming

Max Priming Time

15. MIN

12:15

Priming

System Priming Time

0. MIN

Escape

Men

Select

Start
Stop

Enter

Men

Select

Enter

Escape

Priming Mode Example

Select