Samsung SCX-5115 用户手册

T

ROUBLESHOOTING

8.16

When printing 
using the USB 
connection, an 
error occurs 
repeatedly.

When the USB mode is 
set to “FAST” some PC 
users may experience 
poor USB 
communication.

Change the USB mode to “SLOW.” 
To do so, take the following steps:

1. Press Menu/Exit then 

System Setup from the one-
touch dial keypad. SCX-5115 
users should press Menu then 
Enter.

2. Use 

 or 

 until “USB MODE” 

appears on the top line of the 
display. The current setting 
appears on the bottom line.

3. Press   or   to select “SLOW.” 

4. Press Mode/Enter (Enter on 

SCX-5115) to save the 
selection.

5. Press Stop/Clear to return to 

Standby mode.

Printing is too 
slow.

The computer parallel 
port may not be set for 
high speed 
communications.

If your computer is equipped with 
an ECP parallel port, enable this 
mode of operation. Refer to the 
Enabling High Speed Printer 
Communications section and your 
computer’s user guide.

If using Windows 95, 
the spool setting may 
be set incorrectly.

Point to the Start and then click 

 then Printers. Click 

your printer icon with the right 
mouse button. Click Properties 
and then spool settings on the 

 tab. Select the desired 

setting from the available choices.

Computer may not have 
enough memory (RAM).

Install more RAM in your computer.

The print job is large.

Reduce resolution from 600 dpi to 
300 dpi.