Sharp FO-DC500 用户手册

Messages and Signals

1

0

. T

roub

le

-

shooting

MEMORY FULL ERROR
PRESS STOP KEY

The memory is full (this message appears when 
Option Setting 23, Quick On-line, is set to NO). 
Press the STOP key to clear the message and 
cancel the transmission.

MENU MODE

The MENU key has been pressed.

NO CONF. FUNCTION

Confidential transmission was cancelled because 
the receiving machine does not have a 
confidential function, a confidential passcode is 
not programmed in it, its memory is full, or it is not 
a Sharp model.

NO PAPER

This indicates that you are out of paper. If the 
machine has multiple paper sources, the message 
will be followed by the paper source (or sources) 
that is out of paper in parentheses. If no paper 
source is indicated, all paper sources are out of 
paper.

ONHOOK DIAL MODE

The SPEAKER key has been pressed and the 
machine is waiting for you to dial.

OUTPUT TRAY OFF

The received document tray is not attached. 
Attach it as explained in 

Connections

 in Chapter 1 

(the tray must be attached for the machine to 
operate properly.)

PAPER JAM

The printing paper is jammed. See the following 
section, 

Clearing Paper Jams

.

RCVD CONF. FAX

A confidential fax has been received in memory. 
Print the fax as explained in 

Confidential 

Operations

 in Chapter 6.

REMOVE ORIGINAL(S)

The original document is jammed. See the 
following section, 

Clearing Paper Jams

.

SIZE ERROR

This message will be followed by one of the paper 
sources in parentheses, and informs you that the 
paper loaded in that source is not all the same 
size. 

REPLACE TONER

The toner cartridge must be replaced.