Xerox 7232 用户手册
Settings in the Key Operator Mode
Xerox WorkCentre 7232/7242 System Administrator Guide
35
Button names and icons used on the control panel may differ depending on the country
of purchase.
of purchase.
Settings in the Key Operator Mode
This machine is pre-programmed with default settings which can be customized on the
[Tools] tab in Machine Status. To access the setting menus, entering the Key Operator
mode is required via the <Log In/Out> button. These settings may be accessed in the
System Administrator mode as well.
[Tools] tab in Machine Status. To access the setting menus, entering the Key Operator
mode is required via the <Log In/Out> button. These settings may be accessed in the
System Administrator mode as well.
NOTE: Entering the Key Operator mode is not required for [Setup & Calibration].
4
<Power Saver>
(green light)
(green light)
Indicates whether the machine is in power saver mode. Also
cancels the current power saver mode setting.
cancels the current power saver mode setting.
5
<Clear All>
Resets to the default settings and displays the first screen for the
current pathway.
current pathway.
6
<Interrupt>
Temporarily interrupts a job for programming a priority job.
7
<Stop>
Suspends or cancels a job depending on the job type. When
multiple jobs are being processed, all the jobs will be suspended
or cancelled. Selecting [Stop] on the [Job Status] screen stops
only the selected job.
multiple jobs are being processed, all the jobs will be suspended
or cancelled. Selecting [Stop] on the [Job Status] screen stops
only the selected job.
8
<Start>
Starts or resumes a job.
9
<Speed Dial>
Enters speed dial codes.
10
<C>
Deletes a numeric value or the last digit entered, and replaces the
current value with a default value. Also cancels suspended jobs.
current value with a default value. Also cancels suspended jobs.
11
<Dial Pause>
Inserts a pause while dialing a fax number.
12
<*(asterisk)>
Indicates the special character used in a fax number and
designates a group code. Also allows you to specify an F Code or
a password.
designates a group code. Also allows you to specify an F Code or
a password.
13
<All Services>
Displays the [All Services] screen for selection of all the available
services on the machine.
services on the machine.
14
<Features>
Returns the display to the previous copy, fax, or scan feature
screen when the [Job Status] screen or [Machine Status] screen is
selected.
screen when the [Job Status] screen or [Machine Status] screen is
selected.
15
<Job Status>
Displays the [Job Status] screen where you can check the
progress of a job, or display the log and detailed information of
completed jobs.
progress of a job, or display the log and detailed information of
completed jobs.
16
<Machine Status>
Displays the Machine Status screens where you can check the
machine information, the billing information, and the status of the
toner cartridges and other supplies, can print various reports, and
can configure various settings.
machine information, the billing information, and the status of the
toner cartridges and other supplies, can print various reports, and
can configure various settings.
Button
Function