Xerox 7232 用户手册

Follow these steps to print a configuration report:

Press the <Machine Status> button on the control panel.

Select the [Billing Information] tab.

Select the [Print Reports].

Select the [Printer Reports].

Select the [Configuration Report].

Press the <Start> button on the control panel.

Follow these steps to enter the Key Operator mode, change settings, and exit the Key 
Operator mode.

NOTE: Entering the Key Operator mode is not required for [Setup & Calibration].

Press the <Log In/Out> button on the control panel.

Enter the correct user ID using the numeric keypad on the control panel or the 
screen keyboard. 

NOTE: The default Key Operator ID is “11111”. If the Authentication feature is 
enabled, you may also be required to enter a passcode. The default passcode is “x-
admin”. 

Press the <Machine Status> button on the control panel.

On the Machine Status screen, select the [Tools] tab.

Select a menu from the main menu displayed on the left side of the [Tools] tab.

Select a group in the menu.

Select a feature in the group, and then configure the feature.

NOTE: Some features display the [Change Settings] button. Select the button to 
change settings or to enter information using the screen keyboard. 

Select [Close].

Press the <Log In/Out> button on the control panel.