Xerox 7232 用户手册
Using CentreWare Internet Services to Configure Settings on the Machine
Xerox WorkCentre 7232/7242 System Administration Guide
63
Microsoft Networking
This page allows you to configure the Microsoft Networking settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity]
folder.
folder.
3.
Select the plus symbol [+] to the left of the [Protocols] folder.
4.
Select [Microsoft Networking].
5.
Set up the following displayed in the frame.
Filing Destination:
•
Protocol – Displays whether the protocol is enabled or disabled.
•
Physical Connection – Displays “Ethernet”. This is a display-only item.
•
Transport – Select a transport protocol [TCP/IP].
•
Maximum Connections – Enter the maximum number of simultaneous
connections allowed.
connections allowed.
•
Connection Timeout – Displays “600 seconds”. This is a display-only item.
•
Workgroup – Enter the name of the workgroup the machine belongs.
•
SMB Host Name – Enter the SMB host name with up to 32 characters.
•
TBCP Filter – Select the check box to enable TBCP Filter when processing
PostScript data. This is available only when the optional PostScript kit is
installed. When the transmission data includes binary or EPS data, disable this
feature.
PostScript data. This is available only when the optional PostScript kit is
installed. When the transmission data includes binary or EPS data, disable this
feature.
•
Unicode Support – Specify whether or not to support Unicode support in the
host name and workgroup name during SMB transmission.
host name and workgroup name during SMB transmission.
•
Auto Master Mode – Allows you to enable or disable Auto Master Mode.
•
Password Encryption – Allows you to enable or disable password encryption
during SMB transmission.
during SMB transmission.
WINS Server
Server Information:
•
Protocol – Displays whether the protocol is enabled or disabled.
•
Obtain WINS Server Address Automatically – Select whether to obtain the
WINS server address via DHCP. The check box can be selected only when
obtaining the TCP/IP address via [DHCP] or [DHCP/Autonet].
WINS server address via DHCP. The check box can be selected only when
obtaining the TCP/IP address via [DHCP] or [DHCP/Autonet].
•
Primary Server IP Address & Port – Displays the primary server WINS IP
address when [Obtain WINS Server Address Automatically] is disabled. Change
the address as necessary.
address when [Obtain WINS Server Address Automatically] is disabled. Change
the address as necessary.