Xerox 7232 用户手册

This page allows you to configure the Port9100 settings.

NOTE: Some settings on this page will only be available after you restart CentreWare 
Internet Services, or after the machine is switched off and on.

At the CentreWare Internet Services home page for the machine, select the 
[Properties] tab.

In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity] 
folder.

Select the plus symbol [+] to the left of the [Protocols] folder.

Select [Port 9100].

Set up the following displayed in the frame.

•

Protocol – Displays whether the protocol is enabled or disabled.

•

Physical Connection – Displays “Ethernet”. This is a display-only item.

•

TCP Port Number – Enter the port number for Port 9100.

•

Bidirectional – Displays whether the bidirectional communication is enabled or 
disabled.

•

Maximum Connections per Port – Displays “8”. This is a display-only item.

•

End of Job Timeout – Allows you to specify the connection time-out period when 
transmission fails.

•

PDL Switching – Displays whether the PDL Switching feature is enabled or 
disabled. This is a display-only item.

•

TBCP Filter – Select the check box to enable TBCP Filter when processing 
PostScript data. This is available only when the optional PostScript kit is 
installed. When the transmission data includes binary or EPS data, disable this 
feature.

Select [Apply] to reflect the new settings.

Enter the user ID and passcode and then select [OK].

NOTE: The default user ID is "11111" and the default passcode is "x-admin".

When the reboot message appears, select [Reboot Machine].