Xerox 5230A 用户手册

8 Printer Environment Settings 

270

This section explains how to set up the machine to operate in an IPP (Internet Printing 
Protocol) environment. The following information is provided:

Information Checklist – page 270
IPP Environment – page 270
IPP Installation – page 271
Installation Procedure – page 271
Network Communication Setup – page 271
Computer Setup – page 273
Test Print – page 273

Before starting the IPP installation procedures, make sure that the following items are 
available or have been performed.

If problems are encountered during the installation of the machine, refer to 

The machine supports Internet Printing Protocol (IPP). As Windows 2000/Windows XP/
Windows Server 2003/Windows Me/Windows Vista are installed with the client 
software needed to output to an IPP printer, you can specify this printer using the Add 
Printer Wizard. Using IPP, you can print to a remote printer through the Internet or 
intranet.
The transport protocol for IPP can be TCP/IP.

An existing operational TCP/IP network is required. These procedures 
are not designed to install a network.

Customer

Obtain and record the following information:
• IP address
• Gateway address
• Subnet mask (for IPv4) / Prefix (for IPv6)
• Host  name

Customer

Test the machine to make sure that it is fully installed and functioning 
correctly.

Customer

Install the print driver.

Customer