Xerox FS 5250 IPC 用户手册

Connections and Installation
Xerox FS 5250, User’s Guide

- 20 -

With IPDS as primary emulation, you have now selected 3812 as second
emulation to answer on address 1.

NOTE:
If you wish to define 2 emulations, you are recommended to set the
primary emulation to non-IPDS.

6.3. Upgrading to IPDS

If you need to upgrade your Xerox FS 5250 with the IPC module, please follow
these instruction before proceeding with the installation.

1. Unscrew the 4 screws from the bottom of the converter.

2. Place you hands on each side of the box, bottom facing down and the rear

panel facing you. Carefully press open the top cover of the converter.

3. Place the IPC module (main component side facing up) on the PCB of the

box. Note that the connector has to be placed on top of the PCB’s
connector (to the right on the PCB).

4. Make sure the plastic supports fit in the holes of the IPC module.

5. Press the module gently into position and, while still facing the rear panel,

place the top cover precisely above the bottom cover so that all edges are
aligned. Press the top cover gently into a locked position.

6. Re-insert the screws and fasten.

7. Now proceed to the actual installation of the converter to the printer and

the system.