Xerox FS 5250 IPC 用户手册
Connections and Installation
Xerox FS 5250, User’s Guide
Xerox FS 5250, User’s Guide
- 24 -
6.5.2 Timeout
The Xerox FS 5250 enables printer sharing between the system and a PC.
For this purpose it is possible to specify a timeout period.
For this purpose it is possible to specify a timeout period.
If the printer is receiving input on the parallel port, for example, and there is
a break in the transmission of data, the other input ports will not be polled for
the period speci fied.
a break in the transmission of data, the other input ports will not be polled for
the period speci fied.
The factory default timeout is 20 seconds
. The timeout may be changed
to suit your requirements. This is done by sending a new setup to the Xerox
FS 5250 input port where you want it to take effect.
FS 5250 input port where you want it to take effect.
When specifying the timeout it is also possible to specify a user string. A
user string may be used for changing from one symbol set (e.g. Roman 8) to
another (e.g. IBM -PC8), for example.
user string may be used for changing from one symbol set (e.g. Roman 8) to
another (e.g. IBM -PC8), for example.
NOTE:
Settings on the twinax input port are automatically re-established after
another input port has been using the printer.
Settings on the twinax input port are automatically re-established after
another input port has been using the printer.
On the parallel and RS input port, you have to pro
gram the required
setup yourself.
For more detailed information on the commands required, see the section
"Port Share Option".
"Port Share Option".