Konica Minolta C652DS 用户手册

bizhub C652/C652DS/C552/C452

14-5

Check the following items when you cannot configure settings of the printer driver or cannot print according 
to the settings you have configured.

Reference

-

Some items for the printer driver may not be configured simultaneously.

Cannot select items in the print-
er driver.

Some functions cannot be com-
bined.

Grayed out items cannot be con-
figured.

A "conflict" message saying 
"unable to configure" or "func-
tion will be canceled" appears.

You are trying to configure the 
functions that cannot be com-
bined.

Check carefully the functions you 
have specified, and then specify 
the functions that can be com-
bined.

Cannot print according to the 
settings you have configured.

The settings may not be config-
ured correctly.

Check the setting of each item of 
the printer driver.

The selected functions can be 
combined in the printer driver, 
but may not be combined in this 
machine.

The paper size or paper orienta-
tion specified in the application 
may take precedence over the 
settings in the printer driver 
when printing.

Configure settings in the applica-
tion correctly.

The watermark cannot be print-
ed.

The watermark settings may not 
be configured correctly.

Check the watermark settings.

The density of the watermark 
may be too light.

Check the density setting.

Some graphic applications do 
not print watermarks.

When using such a program, the 
watermark cannot be printed.

The staple function cannot be 
specified.

The staple function cannot be 
used if the Paper Type is set to 
Thick or Transparency.

Check the setting of each item of 
the printer driver.

The staple function requires the 
optional finisher.

Install the required options and 
enable them on the printer driver.

Cannot staple.

When printing a large number of 
pages, stapling cannot be per-
formed.

Change the number of pages to 
be printed.

If the document contains pages 
of different sizes, stapling can-
not be performed.

Check the document.

The stapling position is not as 
expected.

The orientation setting is not 
correct.

Check the stapling position in the 
printer driver settings.

Cannot specify the punch func-
tion.

The hole punching cannot be 
specified when Booklet, Trans-
parency, Thick 2, Thick 3, or En-
velope is selected as the paper 
type.

Check the setting of each item of 
the printer driver.

The optional finisher and punch 
kit are required.

Install the required options and 
enable them on the printer driver.