Philips BDL4211V 用户手册
User Manual BDL4211x
25
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal
regulations.
Contact www.eia.org (Consumer Education Initiative) for additional information on recycling.
Information for UK only
WARNING - THIS APPLIANCE MUST BE
EARTHED.
Important:
This apparatus is supplied with an approved moulded 13A
plug. To change a fuse in this type of plug proceed as follows:
1. Remove fuse cover and fuse.
2.
EARTHED.
Important:
This apparatus is supplied with an approved moulded 13A
plug. To change a fuse in this type of plug proceed as follows:
1. Remove fuse cover and fuse.
2.
Fit new fuse which should be a BS 1362 5A,A.S.T.A. or
BSI approved type.
BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it
should be cut off and an appropriate 3-pin plug fitted in its
place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
If the fitted plug is not suitable for your socket outlets, it
should be cut off and an appropriate 3-pin plug fitted in its
place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
NOTE: The severed plug must be destroyed to
avoid a possible shock hazard should it be inserted
into a 13A socket elsewhere.
avoid a possible shock hazard should it be inserted
into a 13A socket elsewhere.