Philips BDL4211V 用户手册

 

 

 
 

26

 
 
 
 
 
 
 
 
 
 

 

 
How to connect a plug 
The wires in the mains lead are colored in accordance with 
the following code: 
 
BLUE - "NEUTRAL" ("N") 
BROWN - "LIVE" ("L") 
GREEN & YELLOW - "EARTH" ("E") 
 
1.  The GREEN AND YELLOW wire must be connected to 

the terminal in the plug, which is marked with the letter 

"E" or by the Earth symbol 

 or colored GREEN or 

GREEN AND YELLOW. 

2. 

The BLUE wire must be connected to the terminal, which 
is marked with the letter "N" or colored BLACK. 

3. 

The BROWN wire must be connected to the terminal, 
which marked with the letter "L" or colored RED. 

 
Before replacing the plug cover, make certain that the cord 
grip is clamped over the sheath of the lead - not simply over 
the three wires. 

 
 

Information for Users in the U. S. 
 
For units set at 115V: 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor 
cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15A, 
125V. 
 
For units set at 230V: 
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor 
cord a maximum of 15-feet long and a tandem blade, grounding type attachment plug rated 15A, 
250V. 
 
Information for Users outside the U.S. 
 
For units set at 230V: 
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 
15A, 250V. The Cord Set should have the appropriate safety approvals for the country in which 
the equipment will be installed and / or be marked HAR.