FieldServer FS-8704-13 用户手册

 

 

Page 4 

For a detailed discussion on FieldServer configuration, please refer to the instruction manual for the 
FieldServer. The information that follows describes how to expand upon the factory defaults 
provided in the configuration files included with the FieldServer (See “.csv” files on the driver 
diskette). 
 
This section documents and describes the parameters necessary for configuring the FieldServer to 
communicate with a GE-SRTP Driver Server.  

The configuration file  tells the FieldServer about its interfaces, and the routing of data required. In 
order to enable the FieldServer for GE-SRTP Driver communications, the driver independent 
FieldServer buffers need to be declared in the “Data Arrays” section, the destination device 
addresses need to be declared in the “Client Side Nodes” section, and the data required from the 
servers needs to be mapped in the “Client Side Map Descriptors” section. Details on how to do this 
can be found below. 
 
Note that in the tables,  * in dicates an optional parameter, with the bold legal value being the 
default. 

Data_Arrays 

Data_Array_Name 

Provide name for Data Array 

Up to 15 alphanumeric 
characters 

Data_Format 

Provide data format. Each data array can only 
take on one format. 

FLOAT, BIT, UInt16, SInt16, 
Packed_Bit, Byte, 
Packed_Byte, Swapped_Byte 

Data_Array_Length 

Number of Data Objects. Must be larger than 
the data storage area required for the data 
being placed in this array. 

1-10,000 

 
 

 
   Example 

 

//    Data Arrays 
 
Data_Arrays 
Data_Array_Name,  

Data_Format,  

Data_Array_Length 

DA_AI_01,         

UInt16,       

200 

DA_AO_01,         

UInt16,       

200 

DA_DI_01,         

Byte,          

200 

DA_DO_01,         

Byte,          

200