FieldServer FS-8704-13 用户手册
FS-8704-13 GE-SRTP
Driver Manual
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042
Visit our website: www.fieldserver.com E-mail: support@fieldserver.com
Page 5
4.2 Client Side Connections
Section Title
Adapter
Column Title
Function
Legal Values
Adapter
Specify which port the device is
connected to the FieldServer
connected to the FieldServer
N1
Protocol
Specify protocol used
GE_SRTP, SRTP
Example
// Client Side Connections
Connections
Adapter, Protocol
N1, SRTP
Adapter, Protocol
N1, SRTP
4.3 Client Side Nodes
Section Title
Nodes
Column Title
Function
Legal Values
Node_Name
Provide name for node
Up to 32 alphanumeric
characters
characters
Node_ID
Node ID of physical server node
(PLC)
(PLC)
1-255
IP_Address
IP address of physical server node
(PLC)
(PLC)
Must be on the same subnet as
the server or gateway
the server or gateway
Protocol
Specify protocol used
GE_SRTP, SRTP
Adapter
Specify on which port the device is
connected to the FieldServer
connected to the FieldServer
N1
Example
// Client Side Nodes
Nodes
Node_Name, Protocol, IP_Address, Adapter
Node_Name, Protocol, IP_Address, Adapter
Node_A, SRTP, 192.168.1.174, N1
4.4 Client Side Map Descriptors
4.4.1 FieldServer Specific Map Descriptor Parameters
Column Title
Function
Legal Values
Map_Descriptor_Name
Name of this Map Descriptor
Up to 32 alphanumeric characters
Data_Array_Name
Name of Data Array where data is
to be stored in the FieldServer
to be stored in the FieldServer
One of the Data Array names from
“Data Array” section above
“Data Array” section above
Data_Array_Location
Starting location in Data Array
0 to maximum specified in “Data
Array” section above
Array” section above
Function
Function of Client Map Descriptor
RDBC, WRBC, WRBX