Fujitsu MHT2040BH 用户手册

 

3-4 C141-E203-01EN 

(2) Frame 

The MR head bias of the HDD disk enclosure (DE) is zero.  The mounting frame 
is connected to Signal Ground (SG). 

Use M3 screw for the mounting screw and the screw length should 
satisfy the specification in Figure 3.3.  

The tightening torque must be 0.49N•m (5kgf•cm).

m (5kgf•cm). 

When attaching the HDD to the system frame, do not allow the 
system frame to touch parts (cover and base) other than parts to 
which the HDD is attached. 

 

(3)  Limitation of mounting 

Note)  These dimensions are recommended values; if it is not possible to satisfy 

them, contact us. 

 

 

Screw 

Screw 

Details of A 

3.0 or less

3.0 or less

Frame of system
cabinet 

Frame of system 
cabinet 

B 

PCA 

A 

2 

2.5 

2.5 

2.5 

2.5 

DE 

Side surface 
mounting 

Bottom surface mounting