Cisco Systems 15454M6DC 用户手册
8-13
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 8 Performance Monitoring
Pointer Justification Count Parameters
On CTC, the count fields for PPJC and NPJC PMs appear white and blank unless they are enabled on
the Provisioning > Line tabs.
the Provisioning > Line tabs.
shows the PJStsMon# menu on the Provisioning screen.
Figure 8-10 Line tab for enabling pointer justification count parameters
Procedure: Enable Pointer Justification Count Performance Monitoring
Step 1
Open the electrical or optical card of choice. Double-click the card’s graphic in the main (node) view or
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
Step 2
From the card view, click the Provisioning > Line tabs.
Step 3
Click the PJStsMon# menu and select a number.
•
The value of 0 means pointer justification monitoring is disabled.
•
The values 1-N are the STS numbers on one port. One STS per port can be enabled from the
PJStsMon# menu.
PJStsMon# menu.
EC1 PJStsMon# card menu: 0 or 1 can be selected on a total of 12 ports.
OC-3 PJStsMon# card menu: 1, 2, or 3 can be selected on a total of 4 ports.
OC-12 PJStsMon# card menu: 1 or any number through 12 can be selected on 1 port.
OC-48 PJStsMon# card menu: 1 or any number through 48 can be selected on 1 port.
OC-192 PJStsMon# card menu: 1 or any number through 192 can be selected on 1 port.
Step 4
Click Apply and return to the Performance tab to view PM parameters.
61948
Provisioning tab
Line tab
Card view