APC AP7900 用户手册

For any outlets you select, you can schedule any of the following actions to 
occur daily; at intervals of one, two, four, or eight weeks; or only once.

To configure values for 

, 

, and 

for each outlet, see 

. Although you must use the Web 

interface to schedule outlet actions, you can set these values in 
either the Web or control console interfaces.

For an action to be applied to an outlet group, you must have 
outlet groups enabled at the beginning of the scheduled action. 
For example, if 

 is scheduled for 4:00 p.m., the 

 begins at 4:00 p.m. Even if you then enable outlet 

groups during that 

 before any of the outlets are 

scheduled to turn off, the action will be applied only to the 
individual outlet and not the outlet group.

No Action

Do nothing.

On Immediate

Apply power to the selected outlets.

On Delayed

Apply power to each selected outlet according to its value for 

.

†

Off Immediate

Remove power from the selected outlets.

† If an outlet group is selected, the configured delays and reboot duration of the lowest-

numbered outlet (for a local outlet group) or of the global outlet (for a global outlet group that 
is initiating the action).