Buffalo Technology TS-RXL 用户手册
TeraStation User Manual
66
UPS Settings
An UPS (Uninterruptible Power Supply) can protect the TeraStation from power outages and brownouts. To use the
TeraStation with a UPS, proceed as follows:
Plug the power cable of the UPS to a wall socket.
1
Connect the AC cable of the TeraStation to the UPS.
2
Connect the UPS to the TeraStation with a USB or serial connection.
3
Note:
• TS-XEL series TeraStations do not have UPS Port.
Turn on the UPS, then the TeraStation.
4
In the Web Admin interface, click [System] - [Power Management] - [UPS Settings].
5
Click [Modify Settings].
6
7
7
Notes:
• If the UPS has shut down the TeraStation because of a power outage, make sure that power has been restored before
restarting the TeraStation. If the TeraStation is restarted after a shutdown, but power is not available, then the UPS
will not shut down the TeraStation a second time even if its battery is running low.
• If the TeraStation is set to use UPS recovery, then the UPS will restart the TeraStation when normal power is restored.
Check [Enable].
1
Configure the desired settings.
2
Click [Save].
3