Omron C200HX 用户手册
188
Description
When the execution condition is OFF, MOVB(82) is not executed. When the
execution condition is ON, MOVB(82) copies the specified bit of S to the speci-
fied bit in D. The bits in S and D are specified by Bi. The rightmost two digits of Bi
designate the source bit; the leftmost two bits designate the destination bit.
execution condition is ON, MOVB(82) copies the specified bit of S to the speci-
fied bit in D. The bits in S and D are specified by Bi. The rightmost two digits of Bi
designate the source bit; the leftmost two bits designate the destination bit.
1
Bi
1
2
0
Source bit (00 to 15)
Destination bit (00 to 15)
0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 1
Bit
15
15
Bit
00
00
0 1 0 1 0 1 0 0 0 1 1 1 0 0 0 1
0 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1
S
D
Bi
1
2
0
1
Bit
15
15
Bit
15
15
Bit
00
00
Bit
00
00
LSB
MSB
Flags
ER:
C is not BCD, or it is specifying a non-existent bit (i.e., bit specification
must be between 00 and 15).
must be between 00 and 15).
Indirectly addressed DM word is non-existent. (Content of
DM word is
not BCD, or the DM area boundary has been exceeded.)
N:
ON if the leftmost bit of the content of word D is 1, otherwise OFF.
5-16-9
MOVE DIGIT – MOVD(83)
S: Source word
IR, SR, AR, DM, HR, TC, LR, #
Di: Digit designator (BCD)
IR, SR, AR, DM, HR, TC, LR, #
Ladder Symbols
Operand Data Areas
D: Destination word
IR, SR, AR, DM, HR, TC, LR
MOVD(83)
S
Di
D
@MOVD(83)
S
Di
D
Limitations
The rightmost three digits of Di must each be between 0 and 3.
Description
When the execution condition is OFF, MOVD(83) is not executed. When the
execution condition is ON, MOVD(83) copies the content of the specified digit(s)
in S to the specified digit(s) in D. Up to four digits can be transferred at one time.
The first digit to be copied, the number of digits to be copied, and the first digit to
receive the copy are designated in Di as shown below. Digits from S will be co-
pied to consecutive digits in D starting from the designated first digit and contin-
ued for the designated number of digits. If the last digit is reached in either S or D,
further digits are used starting back at digit 0.
execution condition is ON, MOVD(83) copies the content of the specified digit(s)
in S to the specified digit(s) in D. Up to four digits can be transferred at one time.
The first digit to be copied, the number of digits to be copied, and the first digit to
receive the copy are designated in Di as shown below. Digits from S will be co-
pied to consecutive digits in D starting from the designated first digit and contin-
ued for the designated number of digits. If the last digit is reached in either S or D,
further digits are used starting back at digit 0.
First digit in S (0 to 3)
Number of digits (0 to 3)
0: 1 digit
1: 2 digits
2: 3 digits
3: 4 digits
1: 2 digits
2: 3 digits
3: 4 digits
First digit in D (0 to 3)
Not used.
Digit number:
3 2 1 0
Data Movement
Section 5-16