AMD SB750 用户手册

 

 
                                                                                                                                                                                                                                                                                                                                                             

 
 
 

month), hour, minute and second to turn on your system. When set to 0 (zero) for the day of 
the month, the alarm will power on your system every day at the specified time . 

Date (of month)   
You can choose which month the system will boot up.    Set to 0, to boot every day. 
Time (hh:mm:ss)   
You can choose what hour, minute and second the system will boot up. 
Note:  If you have change the setting, you must let the system boot up until it goes to the 

operating system, before this function will work. 

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

 
Reset Configuration Data 
If you enable this item and restart the system, any Plug and Play configuration data stored in 
the BIOS Setup is cleared from memory. 
Init Display First 
Use this item to specify whether your graphics adapter is installed in one of the PCI E slots or 
is integrated on the motherboard. If a PCI E graphics card is installed, the onboard VGA will 
be disabled. 
PCI/VGA Palette Snoop 
This item is designed to overcome problems that can be caused by some non-standard VGA 
cards. This board includes a built-in VGA system that does not require palette snooping so 
you must leave this item disabled. 
Assign IRQ For USB 
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity ofthe 
selected IRQ always awakens the system.