AMD SB750 用户手册

3-10 PC Health Status

This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.

Phoenix – AwardBIOS CMOS Setup Utility

PC Health Status

Item Help

Show PC Health in Post Enabled

Shutdown Temperature Disabled

smart FAN Configuration Press Enter

Vcc3.3 3.36V

Vcore 1.35V

NBVCC 1.12V

+5V 4.85V

+12V 12.05V

5VSB 12.05V

VDIMM 5.07V

CPU Temperature 34

°C

SYS Temperature 32

°C

CPUFAN Speed 2550 RPM

SYS FAN1 Speed 0 RPM

SYS FAN2 Speed 0 RPM

Menu Level >

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Show PC Health in Post

During Enabled, it displays information list below. The choice is either Enabled or Disabled

Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.

PS CPU Smart FAN Configurations
CPU Full-Speed Temp

This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN
will works over 60% of full speed, and the higher temperature will gain higher FAN speed,
after over the temperature which this item setting, the FAN works in full speed.
CPU Idle Temp

This item allows you setting the FAN works in 60% of full speed, when the temperature
lower than the temperature which you setting.

Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.