Q-Logic 8100 SERIES 用户手册

9–Offline Utilities

FlasUTIL

FE0254601-00 A

9-13

The Driver Configuration Main Menu will be displayed. Do not redirect the 
output of the Driver Configuration protocol. Redirecting console output may 
cause failures.

For a more detailed description of the EFI commands used in this procedure, refer 
to the EFI shell documentation provided with your computer or the EFI project 
documentation at 

For information about the EFICFG utility menus and selections, refer to Using the 
QLogic EFI Configuration and Diagnostic Protocols document in the software 
package.

The FlasUTIL utility is for offline QLogic 8100 Series Adapters installed in BIOS 
servers. The FlasUTIL utility performs the following tasks:



Read the multi-boot image



Write the multi-boot image



Verify the multi-boot image



Verify the NVRAM

To install the FlasUTIL utility:

1.

Create a DOS-bootable disk or USB removable drive.

2.

Download the QLogic 8100 Series Adapter multi-boot image file for your 
server model and operating system from 

3.

Extract the multi-boot image file, and copy it to the 3.5-inch disk or USB 
removable drive. If your disk has insufficient space, you can delete text files 
and .efi files from the multi-boot image before copying the folder.



FlasUTIL is a DOS utility that requires the server to boot in DOS, using 
either a DOS disk or a USB removable drive. Do not use the Microsoft 
Windows DOS interface to execute these utilities.



Some FlasUTIL features, such as the NVRAM options, are intended only 
for QLogic Technical Support and, therefore, are not documented in this 
guide.



Do not run this utility from a drive connected to the QLogic 8100 Series 
Adapter.