Q-Logic 8100 SERIES 用户手册

9–Offline Utilities

FlasUTIL

FE0254601-00 A

9-15

After updating the multi-boot image using FlasUTIL, issue the vpd /a /u 

command from the multi-boot image directory on the disk or USB removable 
drive. This command updates the version information for the newly installed 
multi-boot image.

1.

Install the FlasUTIL utility as described in 

.

2.

Locate the update.bat file, which is bundled with the multi-boot image. 

Ensure that all the files that are part of the multi-boot image reside in the 
same directory as the update.bat file.

3.

Execute the update.bat file. The update.bat file contains a script that 

calls the FLASHUTIL.EXE routine (to update the multi-boot image on the 

QLogic adapter) and the VPD.EXE routine (to update the vital product data).

/Q

Quiet mode suppresses all messages on the display.

/S xxxx

Display the serial number of the adapter at address xxxx. If you 
omit the address, the command displays the serial numbers of all 
adapters.

/V xxxx

Display the current BIOS version of the adapter at address xxxx. 
If you omit the address, the command displays the BIOS version 
for all adapters.

/X xxxx

Verify the NVRAM of the adapter at address xxxx. If you omit the 
address, the command verifies the NVRAM for all adapters.

/Y xxxx 

Display the WWPN of the adapter at address xxxx. If you omit 
the address, the command displays the WWPNs for all adapters.

For QLogic adapters that are already operational with a valid multi-boot 
image, use the QConvergeConsole web management GUI or 
QConvergeConsole CLI to update the image. For information about using 
these applications, refer to the appropriate user guide at