ZyXEL Communications ADSL2+4 用户手册
Chapter 7 LAN Setup
P-660H-T1v3s User’s Guide
92
The following table describes the fields in this screen.
7.2.1 The Advanced LAN IP Setup Screen
Use this screen to edit your P-660H-T1v3s's RIP, multicast, Any IP and Windows
Networking settings. Click the Advanced Setup button in the LAN IP screen. The
screen appears as shown.
Networking settings. Click the Advanced Setup button in the LAN IP screen. The
screen appears as shown.
Figure 29 Network > LAN > IP: Advanced Setup
The following table describes the labels in this screen.
Table 17 Network > LAN > IP
LABEL
DESCRIPTION
IP Address
Enter the LAN IP address you want to assign to your P-660H-T1v3s in
dotted decimal notation, for example, 192.168.1.1 (factory default).
dotted decimal notation, for example, 192.168.1.1 (factory default).
IP Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your P-660H-T1v3s
automatically computes the subnet mask based on the IP Address you
enter, so do not change this field unless you are instructed to do so.
example 255.255.255.0 (factory default). Your P-660H-T1v3s
automatically computes the subnet mask based on the IP Address you
enter, so do not change this field unless you are instructed to do so.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Advanced Setup
Click this to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
details of your LAN setup.
Table 18 Network > LAN > IP: Advanced Setup
LABEL
DESCRIPTION
RIP & Multicast Setup
RIP Direction
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast
IGMP (Internet Group Multicast Protocol) is a network-layer protocol
used to establish membership in a multicast group. The P-660H-
T1v3s supports IGMP-v1, IGMP-v2 and IGMP-v3. Select None to
disable it.
used to establish membership in a multicast group. The P-660H-
T1v3s supports IGMP-v1, IGMP-v2 and IGMP-v3. Select None to
disable it.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.