ZyXEL Communications ADSL2+4 用户手册

 Chapter 7 LAN Setup

P-660H-T1v3s User’s Guide

Use this screen to configure the DNS server information that the P-660H-T1v3s 
sends to the DHCP client devices on the LAN. Click Network > DHCP Setup to 
open this screen.

Figure 30   Network > LAN > DHCP Setup

The following table describes the labels in this screen.

Table 19   Network > LAN > DHCP Setup 

DHCP Setup

DHCP

If set to Server, your P-660H-T1v3s can assign IP addresses, an IP 
default gateway and DNS servers to Windows 95, Windows NT and 
other systems that support the DHCP client.

If set to None, the DHCP server will be disabled. 

If set to Relay, the P-660H-T1v3s acts as a surrogate DHCP server 
and relays DHCP requests and responses between the remote server 
and the clients. Enter the IP address of the actual, remote DHCP 
server in the Remote DHCP Server field in this case. 

When DHCP is used, the following items need to be set: 

IP Pool 

Starting 

Address

This field specifies the first of the contiguous addresses in the IP 
address pool.

Pool Size

This field specifies the size, or count of the IP address pool.

Remote DHCP 

Server

If Relay is selected in the DHCP field above then enter the IP 
address of the actual remote DHCP server here.

DNS Server

DNS Servers 

Assigned by 

DHCP Server

The P-660H-T1v3s passes a DNS (Domain Name System) server IP 
address to the DHCP clients.