Roland Fantom-S88 用户手册

下载
页码 228
 
33
Playing in Patch Mode
 
Playing in Patch Mode
 
Creating Smooth Pitch Changes 
 
(Portamento)
 
Portamento is an effect which smoothly changes the pitch from the 
first-played key to the next-played key. By applying portamento 
when Mono mode is selected (see the preceding item), you can 
simulate performance effects such as slurring on a violin.
 
1.
 
Press [PATCH/RHYTHM] to access the Patch Play screen.
 
2.
 
Press [1 (Kbd Part)] to move the cursor to the keyboard part.
 
3.
 
Press [EDIT] to access the Patch Edit screen.
 
4.
 
Press [1 (
 
 
)] or [2 (
 
 
)] to select the “Solo/Porta” tab.
 
A screen like the one shown below appears.
 
fig.03-01_50
 
When you press [7 (Zoom Edit)], the Solo Synth Zoom Edit 
screen will appear, which displays the above parameters in 
graphical fashion, simulating an analog synthesizer. To exit from 
this screen, press [8 (Exit)] or [EXIT].
 
5.
 
Press 
or
 to move the cursor to “Portamento 
Switch.”
 
6.
 
Turn the VALUE dial or press [INC] to select “ON.”
 
You’re ready to play portamento.
 
7.
 
When you want to change the portamento setting, edit the 
following parameters in the screen of step 6.
Portamento Mode
 
 
Portamento Type
 
 
Portamento Start
 
 
Portamento Time
 
 
8.
 
Press [EXIT] to return to the Patch Play screen and play.
 
If you assign “Portamento” as a function to be controlled by the 
assignable switches ([
]/[
]), you can use a button to easily 
 
Selecting the Parameter 
Controlled by the Realtime 
Controllers or D Beam Controller 
 
(Control Setting)
 
The Fantom-S lets you assign the parameters that will be affected 
when you operate the realtime control knobs, assignable switches, D 
Beam, pitch bend, or modulation lever. This lets you modify the 
sound in a variety of ways by operating the controllers.
 
Specifying the Part that Will be 
Affected by the Controller
 
You can specify whether operating the controller will affect the sound 
assigned to the keyboard part or the sound assigned to the pad part.
 
1.
 
Press [PATCH/RHYTHM] to access the Patch Play screen.
 
2.
 
Press [5 (Ctrl Setting)].
 
3.
 
Press [6 (Ctrl Part)].
 
fig.02-27_50
 
4.
 
Use [CURSOR] to select the parameter.
 
5.
 
Either turn the VALUE dial or use [INC][DEC] to turn the 
setting.
 
6.
 
If you want to keep the settings, press [8 (System Write)].
 
7.
 
When you have finished making settings, press [EXIT] to 
return to the Patch Play screen.
 
When Patch mode is selected, controller settings cannot be saved 
for each individual patch. Controller settings are saved as 
system settings.
 
Bender and Modulation Part Select
 
Selects the part that will be controlled by pitch bend messages or 
modulation messages.
 
Value:
 
 KBD, PAD
 
Beam Part Select
 
Selects the part that will be controlled by the D Beam.
 
Value:
 
 KBD, PAD
 
Knob Part Select
 
Selects the part that will be controlled by the realtime control knobs.
 
Value:
 
 KBD, PAD
Reference_e.book 33 ページ 2003年7月14日 月曜日 午後3時25分