Roland Fantom-S88 用户手册

Creating a Rhythm Set

Output Settings

fig.04-15a_50

For details on the setting, refer to

“How to Make the Rhythm

Set Settings”

(p. 64).

Rhythm Out Assign

Specifies for each rhythm set how the direct sound will be output.

Value:

MFX:

Output in stereo through multi-effects. You can also apply chorus
or reverb to the sound that passes through multi-effects.

A, B:

Output to the OUTPUT A (MIX) jack or OUTPUT B jack in
stereo without passing through multi-effects.

1–4:

Output to the INDIVIDUAL 1–4 jacks in mono without
passing through multi-effects.

When the settings are such that signals are split and output from
the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, and no plug is
inserted in the INDIVIDUAL 2 jack, the sounds from
INDIVIDUAL 1 and INDIVIDUAL 2 are mixed together, then
output from the INDIVIDUAL 1 jack. This sound comprises the
sounds from the INDIVIDUAL 1 and 2 jacks.

If the Mix/Parallel parameter is set to “MIX,” all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 193).

Tone Out Assign

Sets the direct sound’s output method for each tone.

Value:

MFX:

Output in stereo through multi-effects. You can also apply chorus
or reverb to the sound that passes through multi-effects.

A, B:

Output to the OUTPUT A (MIX) jack or OUTPUT B jack in
stereo without passing through multi-effects.

1–4:

Output to the INDIVIDUAL 1–4 jacks in mono without
passing through multi-effects.

• If the Rhythm Output Assign is set to anything other than

“TONE,” these settings will be ignored.

• When the settings are such that signals are split and output from

the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, and no plug is
inserted in the INDIVIDUAL 2 jack, the sounds from
INDIVIDUAL 1 and INDIVIDUAL 2 are mixed together, then
output from the INDIVIDUAL 1 jack. This sound comprises the
sounds from the INDIVIDUAL 1 and 2 jacks.

If the Mix/Parallel parameter is set to “MIX,” all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 193).

• When setting the “MFX,” set the output destination with the

MFX Output Assign (p. 179) for the sound after it has passed
through the multi-effects.

• Chorus and reverb are output in mono at all times.

• The output destination of the signal after passing through the

chorus is set with the Chorus Output Select (p. 177) and the
Chorus Output Assign (p. 177).

• The output destination of the signal after passing through the

reverb is set with the Reverb Output Assign (p. 177).

Tone Out Level

Set the level of the signal that is sent to the output destination
specified by Patch/Tone Output Assign.

Value:

0–127