Motorola CPCI-6020 用户手册
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Hardware Preparation and Installation
Startup and Operation
54
If your module is hot swap compliant and you are running fully functional hot swap-
aware software, unlatching this ejector lever will start the shutdown process on the
board.
aware software, unlatching this ejector lever will start the shutdown process on the
board.
4. Carefully pull the module from the chassis.
2.14
Startup and Operation
This section describes startup information used with the CPCI-6020 family of single board
computers in a system configuration. The information includes system considerations, a brief
explanation and graphic of the power-up sequence performed by the firmware.
computers in a system configuration. The information includes system considerations, a brief
explanation and graphic of the power-up sequence performed by the firmware.
Power-up Procedure
Perform the following steps to ensure proper board operation:
1. Before applying power, ensure you configure the hardware properly (for example,
jumper settings, memory installation, flash installation, PMC installation and other
hardware features).
hardware features).
2. Check all connections and ensure the installation is complete (cabling, transition
module connections, if applicable).
3. Once everything is verified, power up the system.
When the power is turned on, the MPU, the hardware and the firmware initialization processes
are performed. The firmware initializes the devices on the CPCI-6020 in preparation for booting
the operating system.
are performed. The firmware initializes the devices on the CPCI-6020 in preparation for booting
the operating system.
The firmware is shipped from the factory with an appropriate set of defaults. In most cases, it is
not necessary to modify the firmware configuration before booting the operating system.
not necessary to modify the firmware configuration before booting the operating system.