Honeywell Model 9700-HB 用户手册

3 - 15

There are two types of system resets: a soft and a hard reset.

A soft reset re-boots the device without losing RAM data. You would perform a soft reset when

• the terminal fails to respond. 
• after installing some software applications.
• after making changes to certain system settings, such as network cards.

1.

Press and hold the RED 

 + TAB 

 keys for approximately 5 seconds. 

2.

The decode and scan LEDs flash for approximately three seconds as the terminal resets. 

3.

When the reset is complete, the Today screen displays.

A hard reset resets the operating system, restores the terminal back to factory defaults, and resets the 
terminal after a bootloader, keyboard, and kernel upgrade.

 A hard reset erases all of the data stored in RAM memory and all RAM installed applications!

1.

Press and hold the RED 

 + ENT 

 keys for approximately 5 seconds.

2.

The decode and scan LEDs light for approximately 3 seconds. 

3.

The terminal re-initializes; see 

Initialize the Mobile Computer

 on page 

2-8.

The terminal goes into Suspend Mode automatically when the terminal is inactive for a programmed 
period of time. You can program this time on the Advance tab of the Power System Setting; see 

 

To put the terminal into Suspend Mode manually, press the Power key 

 and the screen goes blank.

To wake the terminal from Suspend Mode, press the Power key 

 or SCAN key 

.

When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free 
cloth. The terminal can be cleaned with a damp cloth. 

For additional information on hardware maintenance specific to the Dolphin Healthcare Housings, 

®

!