Asrock P4S61 用户手册

1 1

2.5 Installation of Memory Modules (DIMM)

P4S61 motherboard provides three 184-pin DDR (Double Data  Rate) DIMM slots.

Please make sure to disconnect power supply before adding or

removing DIMMs  or  the system components.

Step 1.

Unlock a DIMM slot by pressing the retaining clips outward.

Step 2.

Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

The DIMM only fits in one correct orientation.

It will cause permanent damage to the motherboard and the

DIMM if you force the DIMM into the slot at incorrect orientation.

Step 3.

Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.