Asrock P4S61 用户手册

1 3

2.7 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “SHORT”. If no jumper cap

is placed on pins, the jumper is “OPEN”. The

illustration shows a 3-pin jumper whose pin1

and pin2 are “SHORT” when jumper cap is

placed on these 2 pins.

J u m p e r

Setting

Description

PS2_USB_PWR1

Short pin2, pin3 to enable

(see  p.7  item 1)

+5VSB (standby) for PS/2 or

USB wake up events.

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

JR1

(see  p.7 item 25)

JL1

(see  p.7 item 24)

Note: If the jumpers JL1 and JR1 are short, both front panel and rear panel audio

connectors can work.

Clear CMOS Solder Points

(CLRCMOS1)

(see  p.7  item  11)

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes

system setup information such as system password, date, time, and system

setup parameters. To clear and reset the system parameters to default setup,

please turn off the computer and unplug the power cord, then short the solder

points for more than 3 seconds by using metal material, e.g., a paper clip.

JR1

JL1

solder points