Nortel Networks 4050 用户手册
590 Chapter 11 Managing certificates
320818-A
4
If the private key was not included in the certificate file, repeat
.
5
Apply the changes.
The certificate and private key are now fully installed.
shows sample output for the
/cfg/cert #/import
command.
For more information about the Certificate menu commands, see
.
Figure 169
Adding a certificate and private key by importing
[FTP user name and password]
For FTP, SCP, and SFTP, the user name and password
to access the file exchange server. The default is
to access the file exchange server. The default is
anonymous
.
For anonymous mode, the Nortel SNAS 4050 uses the
following string as the password (for logging purposes):
following string as the password (for logging purposes):
admin@<hostname>.isd
.
[Pass phrase]
If the key is password protected, the password phrase
specified when the key was created or exported.
specified when the key was created or exported.
Table 122
Certificate and key import information
Parameter
Description
>> Certificate 3# import
Select protocol (tftp/ftp/scp/sftp) [tftp]: ftp
Enter host name or IP address of server: ftp.example.com
Enter filename on server: VIP_1.crt
Retrieving VIP_1.crt from 192.168.128.58
FTP User (anonymous):
Password:admin@hostname/IP.isd
received 2392 bytes
Enter pass phrase:
Key added.
Certificate added.
Use 'apply' to activate changes.
>> Certificate 3# apply
Changes applied successfully.