Nortel Networks 4050 Manuel D’Utilisation

590 Chapter 11 Managing certificates

320818-A

 

If the private key was not included in the certificate file, repeat 

 to import the key file, then go to 

.

Apply the changes.

The certificate and private key are now fully installed.

 shows sample output for the 

 command. 

For more information about the Certificate menu commands, see 

.

Adding a certificate and private key by importing

[FTP user name and password]

For FTP, SCP, and SFTP, the user name and password 
to access the file exchange server. The default is 

anonymous

.

For anonymous mode, the Nortel SNAS 4050 uses the 
following string as the password (for logging purposes): 

admin@<hostname>.isd

.

[Pass phrase]

If the key is password protected, the password phrase 
specified when the key was created or exported.

Certificate and key import information

>> Certificate 3# import

Select protocol (tftp/ftp/scp/sftp) [tftp]: ftp

Enter host name or IP address of server: ftp.example.com

Enter filename on server: VIP_1.crt

Retrieving VIP_1.crt from 192.168.128.58

FTP User (anonymous):

Password:admin@hostname/IP.isd

received 2392 bytes

Enter pass phrase:

Key added.

Certificate added.

Use 'apply' to activate changes.

>> Certificate 3# apply

Changes applied successfully.