Raritan Computer Paragon II 用户手册

C

HAPTER 

2:

 

I

NSTALLATION

 

19 

 

 

 

C.  Press  F5 to activate the Administration Menu. Use the Ç and È keys to move the 

highlight to the Channel Configuration entry and press ENTER to select it. 

 

D.  The Channel Configuration menu appears. Use the Ç and È keys and PageUp  and 

PageDown keys to approach channel ports to which subsidiary Base Units are connected. 
The port default device names appear in the Name column and the device  type in the 
Device column. (“P242” for a 2 x 42 Base Unit (P2-UMT242), “P442” for a 4 x 42 Base 
Unit (P2-UMT442), “P832” for an 8 x 32 Base Unit (P2-UMT832M), or “P1664” for a 
16 x 64 Base Unit (P2-UMT1664M).  

 

E.  Continue using the Ç and È keys and PageUp and PageDown keys to move the yellow 

highlight to the Name field for the channel port number where a subsidiary Base Unit is 
installed and press ENTER. The highlight should turn light blue. 

F.  Type in the name you want to assign to the subsidiary Base Unit on this channel port (the 

highlight should turn green when you start typing). Press ENTER when finished, and 
then press S to save the new name. All other paths (channel ports) by which that 
subsidiary Base Unit is attached to the Base Unit above it will be given the same name 
automatically. 

G.  Press F2 to reopen the Selection Menu; make sure that the channel port(s) of the second-

tier Base Unit are properly established. All paths to that Base Unit should be displayed in 
purple.