Motorola SBV5222 用户手册
SBV5222 SURFboard® Digital Voice Modem
12
7
Perform the procedures for
8
To connect the telephone line, plug a phone wire into the Tel 1 connector. You can also connect a second
telephone line to the Tel 2 connector if your provider has enabled a second line.
telephone line to the Tel 2 connector if your provider has enabled a second line.
Setting Up a USB Driver
The following subsections describe setting up a USB driver. Before connecting a PC to the USB port, perform the
appropriate procedure for your Windows version:
appropriate procedure for your Windows version:
•
•
The SURFboard Digital Voice Modem USB driver does not support Macintosh or UNIX computers. For those
systems, you can connect through Ethernet only.
systems, you can connect through Ethernet only.
Caution!
To reduce the risk of fire, use only No. 26 or larger UL Listed or CSA Certified Telecommunication
Line Cord or national equivalent to connect a telephone line to your SURFboard Digital Voice Modem.
Line Cord or national equivalent to connect a telephone line to your SURFboard Digital Voice Modem.
Do not connect both the Ethernet and USB cables to the same computer. Connect to either Ethernet
or USB.
or USB.
Contact your cable provider before connecting your digital voice modem to your existing telephone wiring.
Do not connect the telephone wire to a traditional telephone (
Do not connect the telephone wire to a traditional telephone (
Be sure the phone connectors are neither connected together nor connected to wall jacks on the
same network.
same network.
Caution!
Be sure the SURFboard Voice Modem CD-ROM is inserted in the CD-ROM drive before you plug in
the USB cable.
the USB cable.
Either/or