Motorola WDE1000 用户手册

5.

The WDE1000/1100 cannot 
communicate with other computers 
linked via wireless in Ad hoc network 
type.

Verify that one WDE1000/1100 had a complete 
network initialization, then, activate second party that 
shall be configured with same SSID name, same 
wireless mode (2.4GHz 11Mbs,2.4GHz 54 Mbps, 4.9 
GHz), same bandwidth for 4.9 GHz, and same 
encryption.

6.

Low performance.

Try to create some more distance between the stations 
(Ad hoc) or between the station and the access point 
(Infrastructure). Very small distance may create 
receiver overload.

7.

The set of profiles is different when 
the WDE1000 is inserted into another 
PCMCIA slot of the same computer.

Insert the WDE1000 into the same PCMCIA slot in 
which it was installed. Profiles are linked to a given 
slot.

8.

The laptop battery is consumed very 
fast when the WDE1000/1100 is 
operating.

1. In the active profile, select the specific definitions of 

the environment in which you want to work, e.g. 
Wireless Mode and Bandwidth for 4.9 GHz. This 
will significantly shorten the periodical background 
scanning process.

2.

Select the maximum Power Save mode value in the 
profile definition.

9.

Low performance or unexpected 
behavior of the WDE1000/1100.

Might be caused by conflict problems between 
WDE1000/1100 and other WiFi cards running at the 
same  time. In this case the applications controlling 
these cards must be disabled while WDE1000/1100 is 
running. See “Appendix A - Disabling/Removing Wifi 
Drivers” on page 55 for disabling other WiFi cards.

10.

Your computer restarts work without 
a reason.

Check if your MCU is being upgraded using “Over the 
Air Programming” refer to “Appendix B - Over the Air 
Programming” on page 59.