Motorola WDE1000 用户手册

The IEEE standard that specifies carrier sense media access control and 
physical layer specifications for 1 - and 2 - megabit-per-second (Mbps) 
2.4GHz wireless LANs.

The IEEE standard that governs the deployment of 5GHz (4.9) systems. It 
specifies the implementation of the physical layer for wireless UNII bands 
and provides four channels per 100MHz of bandwidth.

The IEEE standard that specifies carrier sense media access control and 
physical layer specifications for 5.5 - and 11 - Mbps 2.4GHz wireless LANs

The IEEE standard that specifies carrier sense media access control and 
physical layer specifications for 54 Mbps 2.4GHz wireless LANs

A wireless LAN data transceiver that uses radio waves to connect a wired 
network with wireless stations.

A wireless network composed of stations without access points.

A station is configured properly to enable it to communicate with an access 
point.

Specifies the amount of the frequency spectrum that is usable for data 
transfer. It identifies the maximum data rate that a signal can attain on the 
medium without encountering significant power loss.

A radio device that uses the service of an access point to communicate 
wirelessly with other devices on a local area network.

The range of data transmission rates supported by a device. Data rates are 
measured in megabits per second (Mbps).

A ratio of decibels to an isotropic antenna that is commonly used to measure 
antenna gain. The greater the dBi value, the higher the gain and the more 
accurate the angle of coverage.