Motorola CP200XLS 用户手册

Your radio is equipped with the Scan feature, 
which allows you to monitor multiple channels/
talkgroups for voice activity. The radio will stop 
on a channel/talkgroup when it detects activity 
on it.
Scan lists are assigned per channel/talkgroup, 
by your dealer/programmer. Your radio 
automatically switches to a channel/talkgroup, 
within that scan list, when it detects activity. 
You can edit these lists through your radio’s 
menu (see page 35).

•

The LED indicator blinks green during scan 
mode; it stops blinking when the radio switches 
to an active channel/talkgroup.

•

The Gsymbol appears on the display while in 

scan mode.

There are two ways that your radio scans:

•

System Scan (manual)

•

Auto Scan (automatic)

The Talkback feature allows you to respond to 
a transmission while scanning. If transmission 
is detected on a channel/talkgroup while 
scanning, the radio will stop on that channel/
talkgroup for a default period of time after 
activity has ceased. This is referred to as 
“hangtime”. During this hangtime you may 
respond by pressing the PTT button. 

The LED scan indicator stops blinking while 
the radio is in hangtime. If the PTT button is 
not pressed after the preprogrammed 
hangtime, the radio returns to scanning 
channels/talkgroups.

START SYSTEM SCAN G

Press the preprogrammed Scan button to start 
scanning channels/talkgroups in your scan list 
(if Auto Scan is not enabled) (see page 17).
– or –

Select a channel or talkgroup that contains a 
Scan list.

2

J

 to enter menu mode.